verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSID Double Rod Cylinder JSID40X225

The AirTAC JSID Double Rod Cylinder JSID40X225 is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 225mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ40 mm
  • Stroke225 mm
  • Port sizeG1/4
  • Acting typeDouble acting, double rod
  • Rod threadM14×1.5
  • CushionAdjustable, 20.5 mm
$79.52 $87.02Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSID40 stroke, mounting and version on one page All JSID40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSID Double Rod Cylinder JSID40X225

Delivering 528 N of equal force in both directions at 0.5 MPa, this 40 mm bore double-rod JIS profile cylinder uses a G1/4 port and a 225 mm stroke. Its symmetric load path resists torsional twist better than a single rod, while the twin outputs can drive two mechanisms at once. The extruded hard-anodized aluminium barrel keeps the overall body more compact and shorter than an equivalent ISO 15552 cylinder.

The piston travels at 30-800 mm/s and lands on 20.5 mm adjustable air cushions at each end. Note this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors without switching to the -S variant.

Airtac JSID Double Rod Cylinder JSID40X225 Technical Specifications

ModelAirtac JSID Double Rod Cylinder JSID40X225
SeriesJSI JIS-standard profile cylinder
Bore sizeØ40 mm
Stroke225 mm
Acting typeDouble acting, double rod
Port sizeG1/4
Rod threadM14×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 20.5 mm
Max standard strokeUp to 1200 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N739 N
Max (@1.0 MPa)108 kgf

Double-rod: the rod passes through both covers, so output force is equal in both directions.

Model Code: Airtac JSID Double Rod Cylinder JSID40X225

JSIDJIS-standard profile cylinder (double-rod type).
40Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×225Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSID Double Rod Cylinder JSID40X225 Is Used

swap_horiz

Twin-Tool Transfer

Drives two opposing grippers simultaneously from both rod ends to pass parts horizontally between machining stations.

vertical_align_center

Balanced Lift Stage

Lifts a 27 kg vertical payload using the symmetric double-rod path to keep the platen level without twisting.

conveyor_belt

Dual Pusher Array

Mounts a cam on the rear rod to trigger a mechanical valve while the front rod pushes a product down the line.

Is the Airtac JSID Double Rod Cylinder JSID40X225 the Right Cylinder?

This 40 mm bore sits between the 32 mm (345 N) and 50 mm (825 N) sizes, both rated at 0.5 MPa with equal push and pull force. Choose the JSID40X225 when your mechanism needs anti-rotation guidance, twin tooling on one axis, or a rear cam for end-of-stroke signaling. Mounting options include FA, LB, TC, TCM1, and TCM2 blocks. Because the 225 mm stroke exceeds 300 mm, add an external guide rail to prevent side-load sag and seal wear. Remember that a plain cylinder drifts on air loss; add an external rod lock or pilot-operated check valve to hold a suspended load.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSID Double Rod Cylinder JSID40X225 FAQ

Because the rod exits both ends, force is equal in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a theoretical maximum of 108 kgf at 1.0 MPa.

No, this specific SKU does not have a magnet. You must select the -S variant to use CMSE or DMSE magnetic switches for end-of-stroke detection.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSID Double Rod Cylinder JSID40X225

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSID40X225 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.