
The AirTAC JSID Double Rod Cylinder JSID40X300S is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 300mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Delivering 528 N of thrust in both directions at 0.5 MPa, the AirTAC JSID40X300S uses a twin-rod layout to balance the load path entirely. A shaft exits each cover on one shared piston, meaning the rod-side pressure area dictates the output whether extending or retracting. This symmetric build prevents rotation and is highly effective for driving twin tooling stations or mounting a rear sensor cam.
Built to JIS standards with an extruded hard-anodized aluminum profile barrel, this unit is physically shorter than an ISO 15552 cylinder of the same 40 mm bore. The G1/4 port feeds a 30-800 mm/s speed range, while the -S suffix equips the piston with a magnet for direct CMSE/DMSE switches.
| Model | Airtac JSID Double Rod Cylinder JSID40X300S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Drives two opposing pick-and-place grippers simultaneously from one piston, keeping cycle times perfectly synchronized without twisting.
Uses the protruding rear rod to trip an external mechanical limit switch while the internal -S magnet flags CMSE reed sensors for redundancy.
Sizing spans both directions: stepping down to the 32 mm bore yields 345 N each way, while the 50 mm bore jumps to 825 N at 0.5 MPa. The 40 mm bore here hits a sweet spot at 528 N. Choose a double-rod configuration when your mechanism demands anti-rotation guidance, symmetric load distribution, or a physical cam at the back end for end-of-stroke sensing. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because this 300 mm stroke generates leverage, always support the load with external guides to prevent rod bending under side loads. The -S magnet allows precise position tracking.
Quick checklist
Because the rod passes through both covers, force is equal in both directions: 528 N at 0.5 MPa and 739 N at 0.7 MPa. The theoretical max is 108 kgf at 1.0 MPa. The air port is G1/4.
No, a plain double-rod cylinder will drift if air is lost or the valve is centered. The adjustable air cushions only decelerate the piston near the stroke ends; they do not lock it. For load holding, install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.