verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSID Double Rod Cylinder JSID40X400S

The AirTAC JSID Double Rod Cylinder JSID40X400S is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 400mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ40 mm
  • Stroke400 mm
  • Port sizeG1/4
  • Acting typeDouble acting, double rod
  • Rod threadM14×1.5
  • CushionAdjustable, 20.5 mm
$97.93 $105.43Save 7% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSID40 stroke, mounting and version on one page All JSID40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSID Double Rod Cylinder JSID40X400S

Delivering 528 N of thrust in both directions at 0.5 MPa, this 40 mm bore double-rod actuator uses a single piston with a rod exiting each cover. Because the pressure area is identical on both faces, push and pull forces remain perfectly equal at 739 N when running at 0.7 MPa. This symmetric load path prevents piston twist and provides stable guidance for moving external carriages.

The extruded hard-anodized aluminum profile barrel makes this JIS unit more compact and shorter than an equivalent same-bore ISO 15552 cylinder. It features a G1/4 air port, an M14x1.5 rod thread, and adjustable 20.5 mm air cushions at both ends. The -S suffix denotes a built-in piston magnet for fitting CMSE or DMSE reed and electronic switches directly into the side grooves.

Airtac JSID Double Rod Cylinder JSID40X400S Technical Specifications

ModelAirtac JSID Double Rod Cylinder JSID40X400S
SeriesJSI JIS-standard profile cylinder
Bore sizeØ40 mm
Stroke400 mm
Acting typeDouble acting, double rod
Port sizeG1/4
Rod threadM14×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 20.5 mm
Max standard strokeUp to 1200 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N739 N
Max (@1.0 MPa)108 kgf

Double-rod: the rod passes through both covers, so output force is equal in both directions.

Model Code: Airtac JSID Double Rod Cylinder JSID40X400S

JSIDJIS-standard profile cylinder (double-rod type).
40Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×400Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSID Double Rod Cylinder JSID40X400S Is Used

conveyor_belt

Dual-Tool Transfer

Drives two synchronized pick-and-place grippers from opposite rod ends to shuttle parts across a conveyor without twisting.

sync_alt

Symmetric Carriage Drive

Moves an external linear guide carriage from the rear rod while the front rod handles the primary tool, balancing the load path.

straighten

Anti-Rotation Stopper

Acts as a rigid stop gate for incoming workpieces, using the twin rods to resist deflection and hold alignment under impact.

Is the Airtac JSID Double Rod Cylinder JSID40X400S the Right Cylinder?

When sizing this double-rod unit, step down to the 32 mm bore for 345 N of equal both-ways force at 0.5 MPa, or step up to the 50 mm bore for 825 N if your application requires more push and pull power. A double-rod design is the right call when you need anti-rotation stability, twin tooling driven from both ends, or a symmetric load path to mount a rear sensor cam. Mounting options for this JIS profile include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet allows precise end-of-stroke detection using CMSE or DMSE sensors. Because the stroke is 400 mm, you must support the load with external guides to prevent rod bending and excessive side loading.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSID Double Rod Cylinder JSID40X400S FAQ

The double-rod design yields equal force in both directions: 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a theoretical maximum of 108 kgf at 1.0 MPa. It operates on filtered 40 um air at 0.15-1.0 MPa, runs at speeds of 30-800 mm/s, and uses a G1/4 port.

No, a plain actuator cannot hold a load without live air and the piston will drift if pressure is lost; the adjustable 20.5 mm cushions only decelerate the stroke near the end caps. To maintain a vertical or suspended position during air loss, you must install an external rod lock or a pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSID Double Rod Cylinder JSID40X400S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSID40X400S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.