Airtac JSID Double Rod Cylinder JSID40X600S
The AirTAC JSID Double Rod Cylinder JSID40X600S is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 600mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke600 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X600S
Delivering 528 N of thrust in both directions at 0.5 MPa, the AirTAC JSID40X600S uses a twin-rod layout to provide perfectly symmetric push and pull forces. A piston rod exits each end of the hard-anodized aluminum profile barrel, which makes this JIS unit noticeably shorter than a same-bore ISO 15552 cylinder.
This 600 mm stroke version includes a built-in piston magnet for CMSE or DMSE switches that drop directly into the side grooves. The dual rods prevent torsional twisting and allow you to mount a sensor cam or drive two tools at once. Because the 600 mm stroke invites rod sag, external load guides are recommended to prevent side-load bending.
Airtac JSID Double Rod Cylinder JSID40X600S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X600S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X600S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X600S Is Used
Twin Transfer Pushers
Drives two synchronized pushing blades from opposite rod ends to index products on a conveyor without torsional deflection.
Symmetric Stamping Mount
Applies equal clamping pressure from both sides of a fixture, keeping the workpiece centered during a secondary machining operation.
Dual Cam Actuation
Uses the rear rod extension to trip a limit switch or CMSE sensor cam while the front rod performs the primary work.
Is the Airtac JSID Double Rod Cylinder JSID40X600S the Right Cylinder?
When sizing this family, the neighboring 32 mm bore offers 345 N each way, while the 50 mm bore steps up to 825 N at 0.5 MPa. The 40 mm bore sits comfortably in the middle at 528 N. Choose a double-rod configuration when your application demands anti-rotation stability, symmetric load paths, or back-end sensing. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix on this model enables CMSE/DMSE sensing. For this 600 mm stroke, always support the load with external guides to avoid rod bending and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X600S FAQ
Because the rod passes through both covers, force is equal in both directions. It generates 528 N at 0.5 MPa, 739 N at 0.7 MPa, and a theoretical maximum of 108 kgf at 1.0 MPa. The G1/4 port supplies air to both chambers.
No, a standard double-rod cylinder drifts when air is removed or a valve is centered. The adjustable 20.5 mm air cushions only decelerate the piston near the end of stroke. To maintain a vertical position, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X600S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.