Airtac JSID Double Rod Cylinder JSID40X900S
The AirTAC JSID Double Rod Cylinder JSID40X900S is a genuine double acting, double rod JIS-standard air cylinder with a Ø40mm bore and 900mm stroke, G1/4 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ40 mm
- Stroke900 mm
- Port sizeG1/4
- Acting typeDouble acting, double rod
- Rod threadM14×1.5
- CushionAdjustable, 20.5 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID40X900S
Delivering 528 N of thrust in both directions at 0.5 MPa, this JIS double-rod profile cylinder uses a single piston with a rod exiting each cover. The symmetric layout prevents rotation and provides a stable load path. Because the hard-anodized aluminum extrusion omits tie rods entirely, the overall body is noticeably shorter than an ISO 15552 cylinder of the same 40 mm bore.
This -S variant carries a built-in piston magnet for CMSE/DMSE switches in its side grooves. With a 900 mm stroke, you must support the load with external guides to prevent rod bending. The G1/4 port feeds the chambers, and the adjustable air cushions decelerate the motion at each end.
Airtac JSID Double Rod Cylinder JSID40X900S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID40X900S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 900 mm |
| Acting type | Double acting, double rod |
| Port size | G1/4 |
| Rod thread | M14×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20.5 mm |
| Max standard stroke | Up to 1200 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | 739 N |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID40X900S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 40 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID40X900S Is Used
Synchronized Transfer
Drives opposing pusher arms on a conveyor line simultaneously, ensuring parallel material transfer without skewing.
Twin-Spindle Machining
Actuates two matching tool heads from a single piston, keeping cutting forces balanced and preventing rotational twist.
Balanced Vertical Lift
Lifts and lowers a 27 kg workpiece platform with equal force both ways, using the extended rear rod for cam tracking.
Is the Airtac JSID Double Rod Cylinder JSID40X900S the Right Cylinder?
When sizing this double-rod unit, the 40 mm bore sits between the 32 mm option (345 N both ways) and the 50 mm option (825 N both ways). Choose the double-rod configuration when your machine needs anti-rotation guidance, twin tooling driven from both ends, or a sensor cam on the back side. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The -S magnet allows electronic or reed position sensing. Because the stroke is 900 mm, always pair the cylinder with an external linear guide to absorb side loads and prevent rod bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID40X900S FAQ
The force is equal in both directions because of the double-rod design. It provides 528 N at 0.5 MPa and 739 N at 0.7 MPa, with a theoretical maximum of 108 kgf at 1.0 MPa. The air port size is G1/4.
No, a plain double-rod cylinder will drift if air is lost or the valve is centered. The adjustable air cushions only decelerate the piston near the stroke ends and do not act as a brake. For load holding, you must add an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID40X900S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.