Airtac JSID Double Rod Cylinder JSID80X1000
The AirTAC JSID Double Rod Cylinder JSID80X1000 is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 1000mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke1000 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X1000
Delivering 2268 N of thrust in both directions at 0.5 MPa, this 80 mm bore double-rod actuator uses a single piston with a rod exiting each cover. The symmetric layout prevents rotation and provides a stable load path, while the hard-anodized aluminum profile barrel keeps the total length shorter than a same-bore ISO 15552 unit. It features G3/8 ports and M22x1.5 rod threads.
With a 1000 mm stroke, the adjustable 29 mm air cushions at both ends absorb kinetic energy, though you must use external guides to prevent rod bending over this long travel. This plain SKU lacks a magnet and cannot take a sensor, unlike the -S version built for CMSE/DMSE switches.
Airtac JSID Double Rod Cylinder JSID80X1000 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X1000 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X1000
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X1000 Is Used
Dual-Station Transfer
Pushes a workpiece from one side while simultaneously retracting a fixture on the opposite end, keeping cycle times synchronized without adding a second cylinder.
Symmetric Lift Press
Applies 2268 N of equal clamping force on the downstroke and the upstroke, ideal for pressing bearings where a balanced load path prevents tooling binding.
Long-Stroke Material Gate
Uses the 1000 mm travel to open and close a heavy diverter gate, relying on the twin rods to resist torsional twist during rapid 30-800 mm/s actuation.
Is the Airtac JSID Double Rod Cylinder JSID80X1000 the Right Cylinder?
Sizing this 80 mm bore actuator requires balancing your space and force needs. Stepping down to the 63 mm bore drops the equal-both-ways force to 1402 N at 0.5 MPa, while stepping up to the 100 mm bore increases it to 3574 N. Choose this double-rod configuration when your mechanism demands anti-rotation guidance, needs to drive two tools simultaneously from one piston, or requires a sensor cam on the back end. Mounting options include Basic, FA, LB, TC, TCM1 and TCM2. Because the stroke is 1000 mm, you must support the load with external linear guides to avoid rod bending and premature seal wear. Add the -S option if you need position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X1000 FAQ
This cylinder provides equal force in both directions because the rod passes through both covers. It outputs 2268 N at 0.5 MPa and 3175 N at 0.7 MPa each way, with a theoretical maximum of 463 kgf at 1.0 MPa. The stroke is 1000 mm, which is within the 1500 mm standard limit for this 80 mm bore.
No to both. The air cushions only decelerate the piston near the end of travel and do not lock the load; you need an external rod lock or pilot-operated check valve to hold a suspended load. Also, this specific SKU lacks a magnet, so it cannot accept CMSE/DMSE sensors without upgrading to the -S variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X1000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.