Airtac JSID Double Rod Cylinder JSID80X150
The AirTAC JSID Double Rod Cylinder JSID80X150 is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X150
Delivering 2268 N of equal force in both directions at 0.5 MPa, this double-rod JIS profile cylinder uses a G3/8 port and a 25 mm piston rod. Because the rod passes through both covers, the effective area is identical on each side, giving you perfectly balanced push and pull thrust. This symmetric load path prevents piston twist and provides anti-rotation guidance for rigid tooling.
Built with an extruded hard-anodized aluminum profile barrel, the unit is noticeably shorter than an ISO 15552 cylinder of the same 80 mm bore. Note this specific SKU lacks a magnet, so it cannot take CMSE or DMSE sensors; choose the -S variant if you need position detection.
Airtac JSID Double Rod Cylinder JSID80X150 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X150 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X150
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X150 Is Used
Twin-Spindle Machining
Drives two opposing machining heads simultaneously from both rod ends, keeping cutting forces perfectly balanced and preventing spindle deflection.
Symmetric Transfer Arm
Moves a transfer fixture across a belt with equal push and pull thrust, using the dual rods to maintain strict parallel tracking without rotation.
Dual-End Pallet Stopper
Deploys a stopping blade from one end while the opposite rod simultaneously trips a mechanical flag, synchronizing the halt and the signaling.
Is the Airtac JSID Double Rod Cylinder JSID80X150 the Right Cylinder?
Sizing this 80 mm bore means weighing its 2268 N equal-both-ways thrust against the 1402 N of the smaller 63 mm version, or the heavier 3574 N output of the 100 mm model. A double-rod design is the right call when you need anti-rotation stability, twin tooling driven from both ends, a symmetric load path, or a rear-mounted sensor cam. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. For this 150 mm stroke, ensure external guide rails carry any lateral side-load to prevent binding. Remember this non-magnet SKU cannot host a sensor.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X150 FAQ
Because it is a double-rod cylinder, force is equal both ways using the rod-side area. It delivers 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a theoretical max of 463 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa via a G3/8 port.
No to both. The adjustable air cushion only decelerates near stroke end; without live air the piston drifts, so use an external rod lock or pilot-operated check valve for load holding. Also, this SKU has no magnet and cannot take CMSE/DMSE sensors; you need the -S variant for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.