Airtac JSID Double Rod Cylinder JSID80X150S
The AirTAC JSID Double Rod Cylinder JSID80X150S is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X150S
Delivering 2268 N of thrust in both directions at 0.5 MPa, this 80 mm bore double-rod actuator uses a single piston with a rod exiting each end. The symmetric layout creates an equal pressure area on both faces, ensuring push and pull forces remain identical. The G3/8 port feeds the chamber efficiently across the 30-800 mm/s speed range.
Built to JIS standards, this hard-anodized aluminium profile barrel is noticeably shorter and more compact than a same-bore ISO 15552 cylinder. The -S suffix denotes a built-in piston magnet, allowing CMSE or DMSE switches to mount directly into the side sensor grooves. Adjustable 29 mm air cushions at both ends absorb kinetic energy near stroke end, though a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve for held loads.
Airtac JSID Double Rod Cylinder JSID80X150S Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X150S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X150S
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X150S Is Used
Dual-End Transfer Pusher
Uses the extending back rod to push a parallel conveyor lane simultaneously, keeping cycle times synchronized while the main rod handles the primary workpiece.
Anti-Rotation Machining Clamp
Clamps metal parts securely with equal push and pull force, preventing workpiece twist during high-speed milling without needing external linear guides.
Symmetric Lift Platform
Drives a lifting carriage from both ends to distribute the 2268 N load evenly, maintaining platform stability and preventing binding during vertical motion.
Is the Airtac JSID Double Rod Cylinder JSID80X150S the Right Cylinder?
Flanking this 80 mm bore are the 63 mm option yielding 1402 N and the 100 mm option yielding 3574 N, both at 0.5 MPa. Select this 80 mm model when an application demands equal force both ways for anti-rotation guidance, twin tooling operation, or a symmetric load path with back-end sensor cam tracking. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet enables precise end-of-stroke detection via CMSE/DMSE switches. For this 150 mm stroke, ensure external load guiding to prevent excessive side-loading on the piston rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X150S FAQ
Because the rod passes through both covers, force is equal in both directions. It generates 2268 N at 0.5 MPa and 3175 N at 0.7 MPa each way. The theoretical maximum is 463 kgf at 1.0 MPa. The bore features a G3/8 port and a 25 mm rod.
No, a plain double-rod cylinder will drift and cannot hold a load without live air. The adjustable 29 mm cushions only decelerate the piston near the stroke ends. To maintain a vertical position, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.