Airtac JSID Double Rod Cylinder JSID80X250
The AirTAC JSID Double Rod Cylinder JSID80X250 is a genuine double acting, double rod JIS-standard air cylinder with a Ø80mm bore and 250mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ80 mm
- Stroke250 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod
- Rod threadM22×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSID Double Rod Cylinder JSID80X250
Delivering 2268 N of thrust in both directions at 0.5 MPa, this 80 mm bore double-rod actuator uses a single piston with a rod exiting each cover. The symmetric layout creates an equal pressure area on both faces, completely eliminating the push-pull force differential found in single-rod units. This JIS-standard profile body is notably shorter than an equivalent ISO 15552 cylinder, and its hard-anodized aluminum extrusion keeps weight down while resisting workshop wear. A G3/8 port feeds the chambers, and adjustable air cushions decelerate the 250 mm stroke at both ends.
Because the twin rods resist torsional twist and provide a symmetric load path, the unit excels in guiding heavy carriages without extra rails. Note that this specific SKU lacks a piston magnet, so it cannot host CMSE or DMSE sensors; add the -S variant if you require position detection.
Airtac JSID Double Rod Cylinder JSID80X250 Technical Specifications
| Model | Airtac JSID Double Rod Cylinder JSID80X250 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod |
| Port size | G3/8 |
| Rod thread | M22×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod: the rod passes through both covers, so output force is equal in both directions.
Model Code: Airtac JSID Double Rod Cylinder JSID80X250
| JSID | JIS-standard profile cylinder (double-rod type). |
|---|---|
| 80 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSID Double Rod Cylinder JSID80X250 Is Used
Dual-Station Transfer
Uses both rod ends to push and retract workpieces on parallel conveyor lanes simultaneously, ensuring perfectly synchronized part flow.
Anti-Rotation Press
Employs the twin rods to guide a heavy stamping head up and down without twisting, maintaining precise alignment under high off-center loads.
Symmetric Lift Gate
Drives a vertical lifting platform where the equal push and pull forces provide balanced motion control for heavy material handling rigs.
Is the Airtac JSID Double Rod Cylinder JSID80X250 the Right Cylinder?
When sizing this 80 mm bore, stepping down to a 63 mm unit yields 1402 N each way, while moving up to a 100 mm bore provides 3574 N both ways. Choose this double-rod configuration when your mechanism demands anti-rotation stability, needs to drive two tools simultaneously from one actuator, or requires a sensor cam on the back end. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. For this 250 mm stroke, ensure you provide external linear guidance to prevent side-loading damage to the rod seals. Remember that a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if the load must be held.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSID Double Rod Cylinder JSID80X250 FAQ
The force is equal in both directions because of the double-rod design. It outputs 2268 N at 0.5 MPa and 3175 N at 0.7 MPa, with a theoretical maximum of 463 kgf at 1.0 MPa. The air port size is G3/8.
No, a plain pneumatic cylinder does not hold load on air loss or when the valve is centered, as the air cushion only decelerates near the stroke end. To maintain a vertical position, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSID Double Rod Cylinder JSID80X250
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.