Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X150-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke150 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10
Its extruded hard-anodized aluminum barrel omits tie rods entirely, making the body shorter and more compact than a same-bore ISO 15552 unit. The G3/8 port feeds a double-acting double-rod piston that moves at 30-800 mm/s.
An external stop screw lets you trim the extend stroke by up to 10 mm on site, giving a usable forward travel of 140 to 150 mm without swapping the cylinder. This on-site adjustability is perfect for fine-tuning end positions or sharing a spare across stroke variants, while the retract end remains fixed.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10 Is Used
Press Tool Positioning
Dial in the exact 140-150 mm clamping reach on a press fixture using the external adjuster, ensuring precise material contact without remachining stops.
Transfer Gate Diverter
Shorten the extend stroke by 10 mm on site to perfectly align a conveyor diverting gate, adapting to new product sizes on the fly.
Compact Pallet Stop
Fit a high-force 1559 N stopping mechanism into a tight pallet handling cell where a longer ISO 15552 cylinder would violate the machine envelope.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10 the Right Cylinder?
The -10 mm adjustable window is ideal when you need slight end-position tuning after mechanical mounting. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this specific SKU lacks the -S suffix, it cannot accept a CMSE or DMSE magnetic sensor. For any stroke over 300 mm, always guide the load to prevent rod side-loading and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10 FAQ
The nominal 150 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 10 mm on site, yielding a usable forward travel of 140 to 150 mm. The retract end is fixed, and the adjuster sets the end position rather than locking the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.