verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 150mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke150 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$117.01 $124.51Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S

The nominal 150 mm stroke remains the maximum travel, letting you fine-tune the end position without swapping the actuator. Its extruded hard-anodized aluminum barrel is noticeably shorter than a same-bore ISO 15552 unit, saving machine space. The G3/8 port and M18x1.5 rod thread match standard pneumatic layouts.

The -S suffix adds a piston magnet for CMSE/DMSE switches that drop directly into the side grooves. Note that a plain cylinder drifts on air loss; the adjustable cushion only decelerates the piston near the ends, so fit an external rod lock if you need to hold a load.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke150 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×150Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S Is Used

precision_manufacturing

Variable Stroke Clamping

Dial in the exact 75 to 150 mm clamping reach on-site to accommodate different part widths without changing the actuator.

conveyor_belt

Adjustable Transfer Stop

Set the precise stop position for mixed product lines by tweaking the external adjuster to shorten the extend stroke.

warehouse

Vertical Lift Positioning

Lift loads up to 79 kg safely and fine-tune the upper stop point to avoid crushing delicate items at the top.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S the Right Cylinder?

The adjustable stroke is ideal when you need on-site end-position tuning or want a shared spare across slightly different stroke variants. JSIJ mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S magnet supports CMSE/DMSE sensors. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S FAQ

The theoretical maximum force is 318 kgf at 1.0 MPa.

An external stop screw lets you shorten the extend stroke by up to 75 mm on-site, giving a usable extend range of 75 to 150 mm. The nominal 150 mm stroke is the maximum travel, and the retract end remains fixed.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X150-75S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X150-75S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.