Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X160-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10
The hard-anodized aluminum barrel uses no tie rods, maintaining a clean profile while housing a 29 mm adjustable air cushion at each end. It connects via a G3/8 port and moves a 20 mm rod with an M18x1.5 thread.
The -10 code means an external adjuster can shorten the extend stroke on site by up to 10 mm, letting you fine-tune the end position from 150 to 160 mm without swapping the cylinder. Note that this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10 Is Used
End-Position Trimming
Fine-tune the extend stop by up to 10 mm on a clamping fixture to accommodate material thickness variations without changing the cylinder body.
Transfer Diverter
Adjust the extend reach on a sorting gate to handle different package widths on the fly, ensuring precise routing at the 160 mm mark.
Shared Spare Inventory
Keep one cylinder as a universal replacement for 150 to 160 mm stroke machines, using the external screw to match the exact required travel.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10 the Right Cylinder?
The 10 mm adjustable window is ideal for sharing one spare cylinder across several stroke variants or making on-site end-position tweaks. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this non-magnetic SKU lacks a -S suffix, it cannot support position sensing. For any stroke at or above 300 mm, always use a guide rail to prevent side-load damage to the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10 FAQ
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port, a 20 mm rod, and has a 29 mm adjustable cushion at both ends.
The nominal 160 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 10 mm on site, giving a usable range of 150 to 160 mm. The retract end remains fixed. This mechanism only sets the end position; it does not hold the load on air loss. For load holding, you need an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.