Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S
The hard-anodized aluminum barrel keeps the build more compact than a same-bore ISO 15552 unit, and the G3/8 porting feeds the 20 mm rod for speeds of 30-800 mm/s.
The -100 code means you can shorten the 160 mm nominal extend travel by up to 100 mm, yielding a usable 60-160 mm range without swapping the cylinder. Because this is an -S SKU, the built-in piston magnet works directly with CMSE/DMSE switches in the side grooves. The retract end remains fixed, and the adjustable air cushions provide 29 mm of deceleration at each end.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S Is Used
Variable Stroke Clamping
Dial in the exact 60 to 160 mm clamping reach on-site to accommodate different part heights without changing the fixture hardware.
Adjustable Transfer Pusher
Shorten the extend stroke by up to 100 mm to alter the push-off distance for varying box sizes on a packaging line.
Position-Sensitive Divertor
Use the built-in magnet with CMSE/DMSE switches to confirm the adjusted divert position on a sortation conveyor.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S the Right Cylinder?
The 100 mm adjuster window is ideal when you need to fine-tune the extend end position on-site or want a single spare cylinder to cover multiple shorter stroke variants. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet enables CMSE/DMSE sensing. For any stroke at or above 300 mm, always use a guide rail to prevent side-load damage to the piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa.
The external stop screw lets you shorten the extend stroke by up to 100 mm from the 160 mm nominal maximum, giving a usable range of 60-160 mm. The retract end is fixed. This stop sets the end position and does not hold the load; for load holding on air loss, use an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.