Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S
Its hard-anodized aluminum extruded barrel makes it shorter and more compact than a same-bore ISO 15552 unit. The integrated -S magnet allows CMSE or DMSE sensors to drop directly into the side grooves for position detection.
The external adjuster lets you shorten the extend stroke on site by up to 10 mm, giving a usable range of 150 to 160 mm while the retract end remains fixed. Pneumatic connections use a G3/8 port, and the rod end features an M18x1.5 thread.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S Is Used
Clamp Stroke Trimming
Dial in the exact 155 mm clamping reach on machining fixtures by backing out the 10 mm external stop screw, avoiding physical spacer adjustments.
Transfer Stopper Tuning
Fine-tune the protruding stopper height on a packaging line by up to 10 mm to accommodate different carton sizes without changing the cylinder.
Vertical Lift Damping
Lift a 79 kg payload vertically using the 63 mm bore, relying on the 29 mm adjustable air cushions to decelerate the load smoothly at stroke end.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S the Right Cylinder?
The 10 mm adjustable window is ideal for sharing one spare across multiple stroke variants or fine-tuning the end position without swapping the cylinder. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The built-in magnet supports CMSE/DMSE switches. Because the 160 mm stroke exceeds 300 mm only in longer variants, always guide the rod to prevent side-load wear on the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S FAQ
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 pneumatic port and a 20 mm rod with an M18x1.5 thread.
The nominal 160 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke on site by up to 10 mm, yielding a usable range of 150 to 160 mm. The retract end is fixed. This stop sets the end position and is not a load lock; use an external rod lock or pilot-operated check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.