Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 160mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke160 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S
The external stop screw lets you trim the extend stroke by up to 75 mm, giving a usable range of 85-160 mm without swapping the cylinder. The retract end remains fixed. Because the nominal 160 mm stroke acts as the maximum, you can fine-tune the end position precisely where the tooling meets the workpiece.
Built as a JIS-standard profile cylinder, its extruded hard-anodized aluminum barrel is noticeably shorter than a same-bore ISO 15552 unit. This -S variant includes a piston magnet for CMSE/DMSE sensors in the side grooves, and the G3/8 port matches the 63 mm bore class.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S Is Used
Tooling Depth Calibration
Dial in the exact 85-160 mm extend position on a machining fixture using the external adjuster, avoiding the need to machine new spacers for every part variation.
Variable Length Sorting
Adjust the extend stroke on a packaging diverter arm by up to 75 mm on-site to handle different carton widths without changing out the entire actuator.
Shared Spare Inventory
Keep one cylinder as a plant-wide backup for multiple 160 mm stations, using the stop screw to shorten the extend stroke as needed for specific lower-stroke machines.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S the Right Cylinder?
The adjustable stroke is ideal when you need to share a spare cylinder across multiple stroke variants or dial in a final end position on the machine. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The -S magnet supports CMSE/DMSE switches. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S FAQ
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum is 318 kgf at 1.0 MPa. This 63 mm bore uses a G3/8 port.
The nominal 160 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 75 mm, yielding a usable extend range of 85-160 mm. The retract end is fixed, and the stop sets position only—it is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X160-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.