Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S
Its hard-anodized extruded aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit.
The -50S code brings an external adjuster that shortens the extend stroke on-site by up to 50 mm, yielding a usable 125-175 mm range while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder, which is ideal for sharing spares across stroke variants. The built-in magnet (-S) accepts CMSE/DMSE sensors in the side grooves.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S Is Used
Stroke Tuning for Clamping
Dial in the exact 125 to 175 mm extend position on-site to clamp varying part widths without machining new hard stops.
Transfer Pusher Adjustment
Shorten the extend stroke by up to 50 mm to accommodate different product lengths on a packaging line without changing the cylinder.
Shared Spare Inventory
Keep one -50S unit as a universal replacement, adjusting the external stop screw to match the exact stroke of neighboring machines.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S the Right Cylinder?
The adjustable stroke shines when you need on-site end-position tuning or want one shared spare across multiple stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet enables CMSE/DMSE position sensing. Because the 175 mm stroke exceeds 300 mm only in longer models, remember to guide the load here to prevent rod side-load wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 air port.
The -50 code means an external stop screw lets you shorten the extend stroke on-site by up to 50 mm. The nominal 175 mm stroke is the maximum, giving a usable extend range of 125-175 mm, while the retract end remains fixed. The stop sets the end position and is not a load lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.