Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X175-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke175 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75
The hard-anodized aluminum extrusion leaves no external tie rods, making the body noticeably shorter than a same-bore ISO 15552 unit.
The -75 code defines an external adjuster window that shortens the extend stroke on site by up to 75 mm, dropping the usable forward travel from the 175 mm maximum down to 100 mm without swapping the cylinder. You get a 20 mm rod, M18x1.5 rod thread, G3/8 porting, and 29 mm adjustable air cushions at both ends. Because this SKU lacks the -S suffix, it cannot accept a magnetic sensor; adding -S enables CMSE or DMSE switches.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75 Is Used
Variable Clamp Stroke
Dial in the 100 to 175 mm forward travel on-site to clamp castings of different heights without repositioning the fixture.
Adjustable Transfer Pusher
Shorten the extend stroke by up to 75 mm to accommodate varying package sizes on a packaging line while maintaining full retract.
Multi-Height Diverter
Set the external stop screw to route items onto different conveyor lanes, tweaking the end position quickly during format changes.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75 the Right Cylinder?
Stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while moving up to an 80 mm bore raises it to 2513 N, so the 63 mm size sits in a strong middle ground. The 75 mm adjustable window is ideal when you need to fine-tune the extend end position on the floor or want one shared spare across multiple stroke variants. Mounting choices span Basic, FA, LB, TC, TCM1, and TCM2. For any stroke at or beyond 300 mm, guide the load externally to prevent side-load wear on the rod seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75 FAQ
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa the push is 2182 N and the pull is 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port, a 20 mm rod with an M18x1.5 thread, and 29 mm adjustable cushions.
The 175 mm nominal stroke is the maximum forward travel. The external adjuster lets you shorten the extend stroke on-site by up to 75 mm, giving a usable range of 100 to 175 mm. The retract end remains fixed. This stop only sets the end position; it does not lock the load, so use a pilot-operated check valve for holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X175-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.