
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X200-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Its hard-anodized aluminium barrel makes it shorter and more compact than a same-bore ISO 15552 unit, saving valuable machine space.
A built-in external adjuster lets you shorten the extend stroke on-site by up to 10 mm, giving a usable 190-200 mm forward travel while the retract end stays fixed. Note this plain SKU lacks a magnet and cannot take CMSE/DMSE sensors.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 190-200 mm extend reach on a machining fixture using the 10 mm adjuster, ensuring the clamp seats perfectly without remounting the actuator.
Fine-tune the stopping height of a pneumatic gate on a packaging line, using the external screw to compensate for varying product sizes on the fly.
The 10 mm adjustable window is ideal for sharing a spare across stroke variants or dialling in the exact end position on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this non-S SKU lacks a magnet, position sensing is impossible here; choose an -S variant for CMSE/DMSE switches. For any stroke at or above 300 mm, always guide the load to prevent side-load damage.
Quick checklist
The external adjuster shortens the extend stroke on-site by up to 10 mm, giving a usable 190-200 mm forward travel while the retract end stays fixed. The cylinder does not hold load on air loss; the cushion only decelerates, so use an external rod lock or pilot-operated check valve for held loads.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.