Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X200-100 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100
Its hard-anodized extruded aluminum barrel omits tie rods entirely, making the overall body shorter and more compact than a same-bore ISO 15552 unit. The G3/8 port matches the bore's air flow requirements.
The external adjuster allows you to shorten the extend stroke by up to 100 mm, giving a usable range of 100 to 200 mm without changing the cylinder itself. Note that this plain SKU lacks a magnet, so it cannot take CMSE or DMSE sensors without switching to the -S variant.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100 Is Used
Press Fit Tuning
Fine-tune the 100 to 200 mm extend stroke on site to dial in the exact seating depth for bearing inserts without swapping cylinders.
Variable Transfer Stop
Adjust the external stop screw to change the extend position on the fly, accommodating different package widths on a single sorting line.
Shared Spare Inventory
Keep one 200 mm cylinder in stock and shorten the stroke up to 100 mm to cover multiple shorter-stroke machines, reducing spares.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100 the Right Cylinder?
The adjustable stroke is ideal when you want a shared spare across stroke variants or need to fine-tune the extend end position on the machine. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a 200 mm stroke, always guide the load to prevent side-load binding. Remember that the air cushion only decelerates the piston; for load holding on air loss, fit an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100 FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa. It features a 20 mm rod, M18x1.5 rod thread, and G3/8 air port.
The nominal stroke is 200 mm, which is the maximum extend length. The external adjuster lets you shorten the extend stroke by up to 100 mm on site, giving a usable range of 100 to 200 mm. The retract end is fixed, and the stop screw sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.