Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S
The hard-anodized aluminum barrel keeps the unit compact while housing a 29 mm adjustable air cushion at each end. A built-in magnet (-S) allows CMSE or DMSE switches to drop directly into the side sensor grooves for precise position detection.
The -100 code means an external adjuster can shorten the extend stroke on-site by up to 100 mm, giving a usable forward travel range of 100 to 200 mm without swapping the cylinder. Air enters via a G3/8 port, and the M18x1.5 rod end threads directly into your tooling.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S Is Used
Press Stroke Tuning
Dial in the exact 100 to 200 mm extend reach on-site to accommodate different material thicknesses without changing the entire actuator.
Variable Transfer Stops
Adjust the external stop screw to reposition a transfer gate or diverter on the line quickly, accommodating new package sizes on the fly.
Compact Vertical Lifts
Leverage the shorter JIS profile to fit vertical lifting stations in dense packaging cells while safely handling around 79 kg of payload.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S the Right Cylinder?
The adjustable stroke is ideal for sharing a single spare across multiple stroke variants or fine-tuning the end position during machine commissioning. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The included -S magnet supports CMSE/DMSE sensors. For any stroke at or above 300 mm, always use a guide rail to prevent side-load damage to the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa.
The nominal 200 mm stroke is the maximum forward travel. The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, yielding a usable range of 100 to 200 mm. The retract end remains fixed. Note that this stop only sets the end position; it does not lock the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.