Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X200-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 200mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke200 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40
The extruded hard-anodized aluminium barrel keeps the overall body shorter than a same-bore ISO 15552 unit, saving valuable machine space without losing strength.
The external adjuster provides a 40 mm on-site extend-shortening window, letting you tune the usable forward stroke anywhere from 160 mm up to the 200 mm maximum without swapping the cylinder. Air connects via a G3/8 port, and adjustable cushions decelerate the load at both ends. Note that this plain SKU lacks a magnet and cannot take a CMSE or DMSE sensor.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40 Is Used
Press Fit Tuning
Dial in the exact 160 to 200 mm extend position on-site to seat bearings without bottoming out the tooling.
Variable Length Stops
Adjust the forward stop distance in real time to accommodate different package widths on a single sorting line.
Compact Divert Arms
Fit the shorter JIS profile body into tight transfer spaces while still pushing 1559 N at 0.5 MPa to move heavy cartons.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40 the Right Cylinder?
The 40 mm adjustable window is ideal for fine-tuning end positions on-site or keeping one shared spare across multiple stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this is a no-magnet SKU, position sensing is unavailable; add the -S suffix for CMSE/DMSE switch readiness. For any stroke at or over 300 mm, always guide the load to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40 FAQ
This 63 mm bore cylinder pushes 1559 N and pulls 1402 N at 0.5 MPa. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port and features a 20 mm piston rod with an M18x1.5 rod-end thread.
The -40 code means an external stop screw lets you shorten the extend stroke by up to 40 mm on-site. The usable forward travel is 160 to 200 mm, with 200 mm being the maximum. The retract end remains fixed. This mechanism only sets the end position; it does not lock the load, so use an external rod lock or pilot-operated check valve if you need to hold a load against air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X200-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.