verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X225-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke225 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$121.86 $129.36Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40

The nominal 225 mm stroke remains the maximum travel, yielding a usable extend range of 185-225 mm, while the retract end stays fixed. You can fine-tune the end position without swapping the whole unit. The hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 cylinder.

This double-acting double-rod unit uses a G3/8 port and an M18x1.5 rod thread. Adjustable air cushions of 29 mm at each end absorb kinetic energy near stroke ends. Because this SKU lacks the -S magnet option, it cannot accept CMSE or DMSE sensors. Note that a plain cylinder does not hold load on air loss; the cushion only decelerates, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended load.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40 Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke225 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×225Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40 Is Used

precision_manufacturing

Press Stroke Tuning

Dial in the exact 185-225 mm extend reach on a light assembly press without machining new hard stops.

conveyor_belt

Diverter Gate Adjustment

Shift the extend end position by up to 40 mm on-site to accommodate different package sizes on a sorting line.

warehouse

Shared Spare Inventory

Keep one cylinder in stock and adjust the extend window down from 225 mm to fit multiple machines with shorter strokes.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40 the Right Cylinder?

The -40 mm adjustable window is ideal for machines where you need on-site end-position tuning or want a single spare part that covers several stroke variants. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. Since this is a no-magnet SKU, you cannot add position sensors; choose an -S variant if you need CMSE or DMSE switches. For any stroke at or over 300 mm, always use a guide rail to prevent side-load damage to the piston rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40 FAQ

At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port.

An external stop screw lets you shorten the extend stroke on-site by up to 40 mm. The nominal 225 mm is the maximum travel, so the usable extend range is 185-225 mm. The retract end is fixed, and the stop only sets position; it does not lock the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X225-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.