Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke225 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S
The extruded hard-anodized aluminum barrel omits tie rods entirely, making the body shorter and more compact than a same-bore ISO 15552 unit. A G3/8 port feeds the double-acting double rod, and the integrated -S magnet allows CMSE/DMSE sensors to drop directly into the side grooves for precise position detection.
The -40 code means an external adjuster can shorten the 225 mm extend stroke on-site by up to 40 mm, yielding a usable 185-225 mm range without swapping the cylinder. This fine-tunes the end position perfectly. Note that the adjustable stop sets position only; the air cushion decelerates but does not lock, so fit an external rod lock or pilot-operated check valve if you need to hold a load on air loss.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S Is Used
End-Position Tuning
Dial in the exact extend stop on a machining fixture using the 40 mm adjuster window, avoiding the need to machine custom spacers for every part variation.
Transfer Pusher
Pushes parts onto an indexing belt, where the external screw lets operators shorten the stroke by up to 40 mm to accommodate different product lengths on the fly.
Vertical Lift Assembly
Lifts a 79 kg palletized component using the 63 mm bore, relying on the JIS compact profile to fit within a narrow elevator shaft while allowing end-position trimming.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S the Right Cylinder?
The adjustable-stroke window is ideal when you need to tune the extend end-position on-site or want a single spare cylinder that covers 185-225 mm variants. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix means a magnet is already fitted for CMSE/DMSE switches. Because the stroke is 225 mm, ensure adequate side-load guidance to prevent rod binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port and a 20 mm rod with an M18x1.5 thread.
The 225 mm nominal stroke is the maximum extend length. An external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable range of 185-225 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-40S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.