Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X225-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 225mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke225 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75
The hard-anodized aluminum barrel keeps the assembly light without external tie rods.
The -75 code means an external adjuster lets you shorten the extend stroke on site by up to 75 mm, giving a usable range of 150-225 mm while the retract end stays fixed. You can fine-tune the end position without swapping the cylinder. Air connects via a G3/8 port. Note this SKU lacks a magnet, so it cannot take CMSE or DMSE sensors.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75 Is Used
Press Fit Tuning
Dial in the exact 150-225 mm extend position for seating bearings without machining custom spacers.
Variable Transfer Stop
Adjust the extend stop on site to deflect different carton sizes on a moving line.
Pallet Positioning
Shift the extend end point by up to 75 mm to adapt to varying pallet depths.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75 the Right Cylinder?
The JSIJ mounting set includes Basic, FA, LB, TC, TCM1, and TCM2. The adjustable window is ideal when you need to tune end positions on site or want a shared spare across stroke variants. For any stroke at or over 300 mm, guide the load to prevent side-load wear. Without a -S suffix, this cylinder cannot accept magnetic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75 FAQ
It pushes 1559 N and pulls 1402 N at 0.5 MPa. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. The air port is G3/8.
The nominal 225 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on site by up to 75 mm, yielding a usable range of 150-225 mm. The retract end is fixed. This stop only sets the end position; it does not hold the load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X225-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.