Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 250mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke250 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S
The extruded hard-anodized aluminium barrel keeps the total envelope shorter than a same-bore ISO 15552 unit, saving valuable machine space.
The external stop screw lets you trim the extend stroke by up to 10 mm, giving a usable range of 240-250 mm without swapping the actuator. Because this is an -S SKU, a built-in piston magnet works directly with CMSE/DMSE switches in the side grooves for precise position detection. Air connects via a G3/8 port, and adjustable cushions at both ends manage the 29 mm deceleration zone.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S Is Used
Press Fit Tuning
Micro-adjust the 10 mm extend window to set exact insertion depth for pressing bearings without changing the cylinder mounting.
Transfer Diverter
Fine-tune the pusher end position on-site to accommodate different package widths on a single sorting line.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S the Right Cylinder?
The 10 mm adjust window is perfect for sharing one spare cylinder across multiple stroke variants or fine-tuning the end position during machine commissioning. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. For this 250 mm stroke, ensure you use a guide rail to prevent side-load damage to the piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S FAQ
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa the push is 2182 N and pull is 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa.
The nominal 250 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 10 mm on-site, giving a usable range of 240-250 mm. The retract end remains fixed, and this stop only sets position—it does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X250-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.