Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X275-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 275mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke275 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10
Built with an extruded hard-anodized aluminum barrel, the body is notably shorter and more compact than a same-bore ISO 15552 unit. The G3/8 port and 29 mm adjustable air cushions at both ends ensure smooth deceleration.
Because this specific SKU lacks the -S magnet option, it cannot accept CMSE or DMSE sensors for position detection. A plain adjustable-stroke cylinder also does not hold load on air loss; the cushions only decelerate the piston near the end of travel, so fit an external rod lock or pilot-operated check valve if you need to suspend a load safely.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10 Is Used
Press Stroke Tuning
Dial in the exact 265-275 mm extend contact point on a light assembly press without machining new hard stops.
Transfer Diverter
Adjust the extend reach on-site to accommodate slightly different product widths on a packaging line diverter.
Vertical Lift Stop
Set a precise upper travel limit for a 79 kg vertical lift gate, relying on the external stop to fine-tune the endpoint.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10 the Right Cylinder?
The 10 mm extend-shortening window is ideal for fine-tuning end positions on-site without swapping the cylinder, making it a versatile spare across slight stroke variants. Mounting choices include Basic, FA, LB, TC, TCM1, and TCM2. Since this is a non-magnetized SKU, position sensing is unavailable. For any stroke length at or above 300 mm, always guide the load to prevent excessive side-loading on the rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10 FAQ
The -10 indicates a 10 mm external adjuster window. The nominal 275 mm stroke is the maximum, but you can shorten the extend stroke on-site down to 265 mm to fine-tune the end position; the retract end remains fixed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X275-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.