Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 350mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke350 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S
It is a JIS-standard profile cylinder machined from extruded hard-anodized aluminum, making it shorter and more compact than a same-bore ISO 15552 unit. The integrated G3/8 port and M18x1.5 rod thread keep pneumatic and mechanical connections straightforward.
The -100S code means a built-in magnet for CMSE/DMSE sensors and an external adjuster that shortens the extend stroke by up to 100 mm on site. You get a usable extend range of 250-350 mm from the 350 mm nominal maximum, while the retract end stays fixed. The 29 mm adjustable air cushions at both ends decelerate the load smoothly, though an external rod lock or pilot-operated check valve is required if you need to hold a load on air loss.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 350 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S Is Used
Variable Stroke Clamping
Dial in the exact 250-350 mm extend reach for clamping cast parts of varying widths without retooling the entire fixture.
Adjustable Transfer Push
Fine-tune the push-off distance on a transfer line to accommodate different box sizes using the external stop screw.
Positioned Pallet Stops
Set precise pallet halt points on a conveyor by adjusting the extend stroke on site, backed by reliable CMSE/DMSE sensors.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S the Right Cylinder?
The JSIJ adjustable-stroke mechanism shines when you need to fine-tune the extend end position without swapping cylinders, or when you want a shared spare across stroke variants. Mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -S suffix equips the side grooves for CMSE/DMSE reed or electronic switches. Because the 350 mm stroke creates leverage, always support the rod against side-load bending with an external linear guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S FAQ
This 63 mm bore cylinder pushes 1559 N and pulls 1402 N at 0.5 MPa. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port and features a 29 mm adjustable air cushion at each end.
The external adjuster lets you shorten the extend stroke on site by up to 100 mm. With the 350 mm nominal maximum stroke, your usable extend range is 250-350 mm. The retract end is fixed, and the stop sets the end position but does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X350-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.