
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X450-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit, and the G3/8 porting feeds a 20 mm rod with M18x1.5 threading.
A built-in external adjuster lets you trim the extend stroke by up to 10 mm on site, dropping the usable travel from the 450 mm maximum down to 440 mm for fine end-position tuning without swapping the cylinder. Note this plain SKU lacks a magnet and cannot take a CMSE/DMSE sensor.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 440-450 mm extend position to halt pallets precisely on a transfer line without re-engineering the mount.
Shortens the extend stroke by 10 mm on-site to prevent over-travel when clamping variable-height parts in a machining fixture.
The 10 mm extend-adjust window is ideal for synchronizing end stops across shared spare cylinders or finalizing a fixture position on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. Because the 450 mm stroke exceeds 300 mm, always use an external guide to prevent rod bending and side-load wear. For position feedback, you must select the -S variant, as this base model cannot accept a sensor.
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port, a 20 mm rod, and features 29 mm adjustable air cushions at both ends.
The external stop screw lets you shorten the extend stroke by up to 10 mm on-site, giving a usable range of 440-450 mm (the nominal 450 mm is the maximum). The retract end is fixed. This mechanism only sets the end position; it is not a lock. The cylinder will drift on air loss, so use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.