verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X450-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke450 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$150.50 $158.00Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20

Its extruded hard-anodized aluminium barrel omits tie rods entirely, making the overall body shorter and more compact than a same-bore ISO 15552 unit.

The external adjuster allows you to shorten the extend stroke by up to 20 mm, giving a usable range of 430-450 mm without changing the cylinder itself. This on-site flexibility is ideal for sharing spares across stroke variants or fine-tuning a machine setup. Note that this specific SKU lacks a magnet and cannot take a CMSE or DMSE sensor.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20 Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke450 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×450Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20 Is Used

conveyor_belt

Conveyor Diverter Tuning

Fine-tune the 430-450 mm extend position by up to 20 mm on site to perfectly align a diverter gate without machining new mountings.

warehouse

Packaging Pusher Adjustment

Accommodate varying carton sizes on a packaging line by turning the external stopper screw to shorten the extend stroke as needed.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20 the Right Cylinder?

The adjustable stroke feature is highly useful when you need to dial in the extend end position on the factory floor or standardise spare parts across slightly different stroke lengths. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because this is a 450 mm stroke, you must account for side-load and rod-bending risks by fitting external guide rails to prevent premature wear. As a non-magnet SKU, it cannot support position sensing.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20 FAQ

This 63 mm bore cylinder features a G3/8 air port and M18x1.5 rod thread.

The nominal 450 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 20 mm on site, yielding a usable range of 430-450 mm. The retract end remains fixed, and the adjuster only sets the end position, acting as a stop rather than a load lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X450-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.