Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X450-40 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke450 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40
The hard-anodized aluminium barrel keeps the assembly light while housing a 29 mm adjustable air cushion at each end. A G3/8 port feeds the double-acting double-rod piston, which drives a 20 mm rod with an M18x1.5 thread.
The external adjuster lets you shorten the extend stroke on-site by up to 40 mm, giving a usable range of 410-450 mm without changing the cylinder itself. This on-site tuning is ideal for dialling in exact end positions. Note that this SKU lacks a magnet and cannot take a CMSE or DMSE sensor.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40 Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 450 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40 Is Used
Divert Gate Tuning
Dial in the exact extend reach of a sorting diverter on-site using the 40 mm window, ensuring packages hit the correct lane without re-mounting the actuator.
Press Stroke Setup
Adjust the extend end position by up to 40 mm to accommodate different material thicknesses in a light-duty pressing or clamping station.
Pallet Stop Calibration
Fine-tune the stopping point of a pallet on a conveyor line by shortening the stroke from 450 mm down to 410 mm as needed for various pallet sizes.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40 the Right Cylinder?
The 40 mm adjuster window is highly useful when you need to fine-tune the extend end position on-site or standardise a shared spare across slightly different stroke variants. JSIJ mounting options include FA, LB, TC, TCM1 and TCM2. Because the 450 mm stroke is long, always use an external guide rail to prevent rod bending and absorb side loads. Remember this non-magnet version cannot host position sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40 FAQ
This 63 mm bore cylinder uses a G3/8 port.
The nominal 450 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 40 mm, giving a usable range of 410-450 mm. The retract end remains fixed. This mechanism only sets the end position; it does not lock the load, so use an external rod lock or pilot-operated check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X450-40
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.