
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X500-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 500mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Its hard-anodized extruded aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 unit.
The -40 code means an external adjuster can shorten the 500 mm extend stroke by up to 40 mm, giving a usable range of 460-500 mm without changing the cylinder itself. The retract end remains fixed. Because this SKU includes the -S magnet, you can fit CMSE or DMSE sensors directly into the side grooves for position detection. Note that the adjustable stop sets the end position only; it does not hold load on air loss, so use an external rod lock for vertical holding.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Pushes parts off a belt at 500 mm, with the 40 mm adjuster dialing in the exact drop point for different product widths.
Acts as a 460-500 mm extendable stop gate on a packaging line, allowing on-site position tweaks without swapping cylinders.
Provides 1559 N of downward push for light pressing tasks, using the adjuster to set precise bottoming height.
The adjustable stroke is ideal if you want one shared spare across slightly different stroke variants, or need to fine-tune the extend end position on the machine. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. The built-in -S magnet supports CMSE/DMSE switches. Because the 500 mm stroke is long, always use an external guide to prevent rod bending and side-load damage.
Quick checklist
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. The G3/8 port supplies air to the 20 mm rod.
The 500 mm nominal stroke is the maximum. An external stop screw lets you shorten the extend stroke by up to 40 mm on site, giving a usable range of 460-500 mm. The retract end is fixed, and this stop only sets position, it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.