Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 500mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke500 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S
The external adjuster allows you to shorten the extend stroke on-site by up to 50 mm, meaning the usable extension range is 450-500 mm while the retract end remains fixed. This on-site adaptability lets you fine-tune the stroke without physically changing the cylinder. The extruded hard-anodized aluminium profile barrel contains no tie rods, making the overall body shorter and more compact than a same-bore ISO 15552 unit.
Equipped with a -S suffix, this model features a built-in piston magnet for CMSE/DMSE sensors that drop directly into the side grooves. Air connections use a G3/8 port, and adjustable air cushions of 29 mm at each end decelerate the piston smoothly. Remember that the cushion only slows the load; an external rod lock or pilot-operated check valve is required to hold a load securely on air loss.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S Is Used
Divert Gate Tuning
Allows operators to fine-tune the 450-500 mm extend position of a sorting diverter on-site without swapping cylinders, ensuring packages hit the correct lane.
Adjustable Stop Fence
Acts as a movable end-stop for varying pallet sizes on a roller line, using the external adjuster to shorten the extend stroke exactly where the load needs to halt.
Press Stroke Setup
Provides a 63 mm bore pressing force with a tweakable end position, letting maintenance dial in the exact 450-500 mm extension for different workpiece heights.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S the Right Cylinder?
The adjustable -50 mm window is highly useful when you need to share a single spare cylinder across multiple stroke variants or perform on-site end-position tuning. JSIJ mounting options include Basic, FA, LB, TC, TCM1, and TCM2. Because the stroke is 500 mm, you must account for side-load risks and use external guides to prevent rod bending. The integrated magnet supports CMSE/DMSE switches for position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S FAQ
This 63 mm bore cylinder uses a G3/8 port and a 20 mm piston rod with an M18x1.5 thread. The theoretical maximum force is 318 kgf at 1.0 MPa. Adjustable air cushions are 29 mm at both ends, and operating speed ranges from 30-800 mm/s.
The -50 code means an external stop screw lets you shorten the extend stroke on-site by up to 50 mm. The nominal 500 mm stroke is the maximum, so the usable extension range is 450-500 mm. The retract end is fixed. This stop only sets the end position; it is not a load lock, so you need an external rod lock or pilot-operated check valve to hold a load securely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.