Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 500mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ63 mm
- Stroke500 mm
- Port sizeG3/8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM18×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S
The nominal 500 mm travel remains the maximum, yielding a usable extend range of 425-500 mm, while the retract end stays fixed. Because the body uses an extruded hard-anodized aluminum profile rather than retaining rods, the overall envelope is shorter and more compact than a same-bore ISO 15552 unit.
This built-in flexibility means you can fine-tune the end position without swapping the cylinder, making one spare suitable across multiple stroke variants. The -S suffix adds a piston magnet for CMSE/DMSE sensors that drop directly into the side grooves. Pneumatic connections use a G3/8 port, and adjustable air cushions of 29 mm at each end absorb kinetic energy near the stroke limits.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S Technical Specifications
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S Is Used
Transfer Push-Off
Pushes parts off a belt at 500 mm, with the 75 mm window allowing on-site tuning of the push distance to match varying pallet widths.
Vertical Material Lift
Lifts approximately 79 kg of stock using the 425-500 mm extend range, relying on the adjustable cushion to decelerate the load smoothly.
Press Standby Stroke
Acts as an approach cylinder where the final 75 mm of travel is dialed in precisely to position tooling without remounting the actuator.
Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S the Right Cylinder?
The 75 mm adjustable window is especially useful for dialing in exact end positions on-site or keeping a single spare part for machines that need slightly different extend lengths. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The -S magnet supports CMSE/DMSE switches for position feedback. Because the 500 mm stroke is long, always use an external guide rail to prevent rod bending and absorb side loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S FAQ
The theoretical maximum force is 318 kgf at 1.0 MPa. The air port size is G3/8.
An external stop screw shortens the extend stroke by up to 75 mm on-site, giving a usable extend range of 425-500 mm while the retract end remains fixed. This mechanism only sets the end position; it does not lock the load. If air pressure drops, the piston drifts, so you need an external rod lock or pilot-operated check valve for load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X500-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.