
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X600-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 600mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
An external stop screw lets you shorten the forward travel by up to 75 mm, giving a usable extend range of 525 to 600 mm without swapping the actuator. The retract end remains fixed. Built with an extruded hard-anodized aluminum barrel, the body is noticeably shorter and more compact than a same-bore ISO 15552 unit. Air connects via a G3/8 port, and adjustable air cushions of 29 mm at each end manage end-of-stroke deceleration.
Because this SKU lacks the -S magnet option, it cannot accept CMSE or DMSE position sensors. A plain pneumatic actuator also does not hold load on air loss; the cushion only decelerates, so fit an external rod lock or pilot-operated check valve if you need suspended load security. With a 600 mm stroke, external guides are strongly recommended to prevent rod bending under side loads.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X600-75 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tune the 600 mm extend stroke by up to 75 mm on-site to perfectly align a diverter gate with varying product sizes without machining new mounts.
Adjusts the external stop screw to shorten the extend stroke from 600 mm down to 525 mm, accommodating different carton depths on a shared line.
The -75 mm adjustable window is ideal for fine-tuning the extend end position on-site or sharing a single spare cylinder across several slightly different stroke variants. JSIJ mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. Remember that this non-magnetized version cannot host sensors; choose the -S variant if you require CMSE or DMSE switches. For the 600 mm stroke, always use external guides to absorb side loads and protect the rod from bending.
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa. It features a 63 mm bore, a 20 mm rod, a G3/8 port, an M18x1.5 rod thread, and 29 mm adjustable air cushions at both ends.
The nominal 600 mm stroke is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 75 mm, yielding a usable extend range of 525 to 600 mm. The retract end position is fixed. This mechanism only sets the end position and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.