
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X700-10 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The extruded hard-anodized aluminium profile barrel makes it shorter and more compact than a same-bore ISO 15552 cylinder, while the G3/8 port handles the air flow. An external stop screw lets you shorten the extend stroke by up to 10 mm on site, giving a usable range of 690 to 700 mm without swapping the cylinder.
The nominal 700 mm stroke remains the maximum, and the retract end stays fixed. Because this SKU lacks the -S magnet option, it cannot take a CMSE or DMSE sensor. Note that the adjustable cushion only decelerates the piston near the ends; an external rod lock or pilot-operated check valve is required to hold a load securely.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-10 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tune the 700 mm extend stop by 10 mm to perfectly align a pallet diverter arm without machining new hard stops.
Extends deep into a machine bed to clamp parts, using the adjustable cushion to decelerate smoothly at the end of travel.
The 10 mm extend adjuster is ideal for fine-tuning end positions on site or sharing a spare across stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2 brackets. Because the 700 mm stroke is quite long, always use external guides to prevent rod bending and side loads. Without the -S suffix, this specific model cannot support magnetic sensing.
Quick checklist
This 63 mm bore cylinder uses a G3/8 port and an M18x1.5 rod thread.
The -10 indicates an external adjuster that lets you shorten the extend stroke by up to 10 mm on site. The usable extend range is 690 to 700 mm, with 700 mm being the maximum nominal stroke. The retract end is fixed, and the adjuster only sets the end position rather than locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.