
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X700-100 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The external adjuster allows the extend stroke to be shortened by up to 100 mm, giving a usable range of 600 to 700 mm while the retract end remains fixed. This on-site tuning lets you fine-tune the stop position without physically changing the cylinder. The extruded hard-anodized aluminum barrel makes the unit more compact and shorter than an ISO 15552 cylinder of the same bore.
This double-acting double-rod unit runs at 30-800 mm/s and features adjustable air cushions of 29 mm at each end to decelerate the payload smoothly. Note that this specific SKU lacks a magnet and cannot accept CMSE/DMSE sensors; you would need the -S variant for position detection. Furthermore, the cushion only decelerates the load and does not hold it in place on air loss. To prevent drift, you must fit an external rod lock or a pilot-operated check valve. Because the 700 mm stroke is quite long, always use external guides to prevent rod bending and manage side loads.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-100 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact push distance for varying product lengths on a transfer line using the 100 mm extend window without swapping the cylinder.
Use the 700 mm stroke to reach deep into a machine, fine-tuning the final pressing position on-site to compensate for material thickness variations.
The JSIJ series mounting options include Basic, FA, LB, TC, TCM1, and TCM2. The -100 mm adjustable window is highly useful when you need a shared spare across slight stroke variants or want to dial in the exact extend end position on the machine. Without the -S suffix, this model has no magnet and cannot support sensing. Given the 700 mm stroke, external linear guides are essential to absorb side loads and protect the piston rod from bending. Theoretical maximum force is 318 kgf at 1.0 MPa.
Quick checklist
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It features a 20 mm rod, M18x1.5 rod thread, G3/8 port, and 29 mm adjustable cushions at both ends.
The nominal stroke is 700 mm, which is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, giving a usable range of 600 to 700 mm. The retract end is fixed, and this stop mechanism only sets the end position; it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.