
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X700-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Its extruded hard-anodized aluminium barrel omits tie rods entirely, making the overall body shorter and more compact than a same-bore ISO 15552 unit. A G3/8 port feeds the double-acting double rod, while adjustable air cushions of 29 mm soften the impact at both ends.
The external stop screw lets you shorten the extend stroke on-site by up to 20 mm, giving a usable range of 680-700 mm without swapping the cylinder. This on-site adjustability means you can fine-tune the stroke to clear obstructions or share one spare across multiple stroke variants. Note that this specific SKU lacks a magnet and cannot accept CMSE/DMSE sensors.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 700 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tune the 680-700 mm extend reach on-site to perfectly nudge varying package sizes off a main belt without re-mounting the actuator.
Handles 700 mm extended pushes in compact assembly cells where the shorter JIS profile saves valuable floor space over ISO 15552 units.
The 20 mm extend-shortening window is ideal for dialing in final end positions on-site or keeping a single spare cylinder for machines running slightly different stroke lengths. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is a 700 mm stroke, external guides are strongly recommended to prevent rod bending and manage side loads. As a non-magnetized SKU, it cannot host position sensors; choose the -S variant for CMSE/DMSE switch readiness.
Quick checklist
It uses a G3/8 port, a 20 mm rod with an M18x1.5 thread, and 29 mm adjustable cushions at both ends.
The nominal 700 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 20 mm, yielding a usable range of 680-700 mm. The retract end remains fixed. This stop only sets the end position; it is not a load lock, so use an external rod lock or pilot-operated check valve if you need to hold a load on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.