verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke700 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$189.79 $197.29Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S

A built-in piston magnet supports CMSE/DMSE sensors in the side grooves, while the hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit. The G3/8 port feeds the 30-800 mm/s speed range.

The external stop screw provides a 40 mm adjustment window, letting you trim the usable extend stroke down to 660 mm without swapping the cylinder. Note that this stop mechanism only sets the end position; it does not lock the load on air loss.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke700 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×700Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S Is Used

conveyor_belt

Sorter Diverter Tuning

Fine-tune the 660-700 mm extend reach on-site to perfectly align a package diverter arm without machining new mountings.

warehouse

Variable-Height Pusher

Adjust the extend stop to push cartons of different sizes from a shared conveyor lane using a single cylinder footprint.

vertical_align_bottom

Long-Reach Lowering Arm

Use the 700 mm stroke to lower goods into a pallet cell, relying on the external guide rail to absorb side loads.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S the Right Cylinder?

The 40 mm extend-shortening window is ideal for sharing one spare across slightly different machine variants or fine-tuning a final end position on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because the stroke is 700 mm, always use an external guide rail to prevent rod bending and side-load damage. The -S suffix means the magnet is present and ready for CMSE/DMSE switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S FAQ

The theoretical maximum is 318 kgf at 1.0 MPa. It uses a 20 mm rod, M18x1.5 rod thread, G3/8 port, and has 29 mm adjustable air cushions at both ends.

The nominal 700 mm stroke is the maximum extend length. The external adjuster lets you shorten the extend stroke by up to 40 mm on-site, giving a usable range of 660-700 mm. The retract end remains fixed. This mechanism sets the end position and does not hold the load if air pressure is lost.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X700-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X700-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.