
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The extruded hard-anodized aluminium profile barrel makes it shorter and more compact than a same-bore ISO 15552 cylinder. It uses a G3/8 port and an M18x1.5 rod thread.
The external adjuster lets you shorten the extend stroke on-site by up to 20 mm, giving a usable forward range of 55 to 75 mm while the retract end stays fixed. This on-site tuning means you can fine-tune the end position without changing the cylinder itself.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 55 to 75 mm insertion depth for bearing presses without swapping hardware.
Fine-tune the extend reach on-site to accommodate different package widths on the line.
Use the external stop screw to set precise lifting endpoints in space-constrained racking.
If 1559 N at 0.5 MPa is too much, step down to the 50 mm bore for 982 N. If you need more power, the 80 mm bore supplies 2513 N. The 20 mm adjust window is ideal for sharing a spare across stroke variants or finalizing end positions during commissioning. Mounting options include FA, LB, TC, TCM1, and TCM2. This plain SKU lacks a magnet and cannot take a sensor; add the -S variant for CMSE/DMSE switches. For any stroke over 300 mm, guide the load to prevent side-load wear.
Quick checklist
It pushes 1559 N and pulls 1402 N at 0.5 MPa. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa.
The nominal extend stroke is 75 mm. The external adjuster lets you shorten that forward travel by up to 20 mm on-site, yielding a usable range of 55 to 75 mm. The retract end is fixed. This stop sets the end position but is not a load lock; use an external rod lock or pilot-operated check valve to hold a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.