verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke75 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$107.44 $114.94Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S

The extruded hard-anodized aluminum body is noticeably shorter than a same-bore ISO 15552 unit, saving valuable machine space.

The -20 code means an external adjuster can shorten the extend stroke on-site by up to 20 mm, giving a usable range of 55 to 75 mm. This lets you fine-tune the end position without swapping the cylinder. The -S suffix adds a built-in piston magnet for CMSE/DMSE sensors in the side grooves. Pneumatic connections use a G3/8 port, and adjustable air cushions 29 mm long decelerate the load at both ends.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke75 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×75Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S Is Used

precision_manufacturing

Press Fit Tuning

Dial in the exact 55 to 75 mm extend depth for seating bearings without machining custom spacers.

conveyor_belt

Dynamic Diverters

Adjust the extend stop on-site to handle varying package sizes on a single sorting line.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S the Right Cylinder?

When sizing this 63 mm bore, stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore raises it to 2513 N. The adjustable 55 to 75 mm extend window is ideal when you need to tune the end position on-site or want a shared spare across slight stroke variants. You can mount it via FA, LB, TC, TCM1, or TCM2 brackets. The -S magnet supports CMSE/DMSE switches for position confirmation. For any stroke length at or above 300 mm, always use a external guide to prevent side-load damage.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S FAQ

At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. The air port is G3/8.

The external stop screw lets you shorten the extend stroke on-site by up to 20 mm. The usable extend range is 55 to 75 mm, with 75 mm being the maximum. The retract end is fixed. This mechanism sets the end position and is not a load lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X75-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.