
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-40S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The extruded hard-anodized aluminium barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit. A G3/8 port feeds the double-acting double rod, while the integrated magnet supports CMSE/DMSE switches in the side grooves.
The external stop screw provides a 40 mm adjustment window, letting you fine-tune the extend end position from 35 to 75 mm without swapping the cylinder. Note that the retract end is fixed, and the adjustable air cushions only decelerate the load; use an external rod lock for true holding.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-40S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 35 to 75 mm clamping reach on the fly using the external adjuster to accommodate different part heights without changing tooling.
Safely lift approximately 79 kg on the extend stroke and set the precise drop height on-site using the 40 mm shortening window.
The 40 mm adjustable window is ideal for sharing one spare across multiple stroke variants or finalizing end positions on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix means a magnet is built in for CMSE/DMSE sensors. For any stroke length reaching 300 mm or more, always guide the load to prevent side-load damage.
Quick checklist
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port and a 20 mm rod.
The nominal maximum extend stroke is 75 mm. The external stop screw lets you shorten that extend stroke on-site by up to 40 mm, giving a usable range of 35 to 75 mm. The retract end remains fixed, and this mechanism sets the end position rather than locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.