
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-50SLB is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The external stop screw lets you shorten the extend stroke on-site by up to 50 mm, giving a usable range of 25 to 75 mm while the retract end stays fixed. Its extruded hard-anodized aluminum barrel makes it shorter and more compact than a same-bore ISO 15552 cylinder. The G3/8 port and M18x1.5 rod thread handle the air and mechanical linkage demands of mid-range automation.
Because the -S option is present, a built-in piston magnet allows CMSE or DMSE switches to drop directly into the side grooves for position sensing. Remember that the adjustable stop sets the end position but does not lock the load; a plain cylinder drifts on air loss, so use an external rod lock or pilot-operated check valve if you need to hold a suspended weight.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-50SLB |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Dial in the exact 25 to 75 mm extend position for pressing bearings without swapping the physical cylinder.
Adjust the extend stop on-site to deflect different package sizes on a packaging line using the LB foot mount.
Lift loads up to 79 kg and set the precise raise height, relying on an external check valve to hold the load safely.
When sizing this 63 mm bore, stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore raises it to 2513 N. The 50 mm adjustable window is ideal when you need to fine-tune the extend endpoint on-site or want a shared spare across slight stroke variants. The included LB foot mounting accessory provides a stable base for rigid framing. You can also use FA, TC, TCM1, or TCM2 mounts. For any stroke length reaching 300 mm or more, always guide the load to prevent rod side-load damage. The -S magnet supports reed or electronic sensors for end-position confirmation.
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa.
The external stop screw lets you shorten the extend stroke on-site by up to 50 mm. The nominal 75 mm stroke is the maximum, so the usable extend range is 25 to 75 mm. The retract end is fixed, and the stop only sets the end position rather than locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.