verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X75-75 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke75 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$102.79 $110.29Save 6% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75

Its hard-anodized extruded aluminum barrel omits external tie rods, making the body shorter and more compact than a same-bore ISO 15552 unit.

The external adjuster lets you shorten the extend stroke on-site by up to the 75 mm window, meaning the nominal 75 mm stroke serves as your maximum while the retract end remains fixed. You can fine-tune the end position without swapping the cylinder. The G3/8 port drives a 30-800 mm/s speed range. Note this SKU lacks a magnet and cannot take a sensor; the -S variant enables CMSE/DMSE switches.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75 Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke75 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×75Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75 Is Used

precision_manufacturing

Press Fit Tuning

Dial in the exact 0-75 mm extend contact point for light-duty bearing presses without reprogramming the machine cycle.

conveyor_belt

Variable Transfer Stops

Act as an adjustable lane diverter stop, tweaking the extend length on-site to accommodate different carton widths.

packaging

Sealing Head Feed

Fine-tune the extend stroke on a film sealing head to maintain precise pressure across varying package thicknesses.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75 the Right Cylinder?

The 75 mm adjustable window is ideal for sharing one spare across multiple stroke variants or dialing in a precise end position on-site. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this plain cylinder drifts on air loss and the cushion only decelerates, use an external rod lock for held loads. For any stroke over 300 mm, add a guide rail to prevent side-load wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75 FAQ

At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical max force is 318 kgf at 1.0 MPa. It uses a G3/8 port.

The external stop screw lets you shorten the extend stroke on-site by up to 75 mm. The nominal 75 mm stroke is the maximum, yielding a usable extend range of 0-75 mm, while the retract end remains fixed.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X75-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X75-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.