verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC JSI Series · JIS Standard Cylinder

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100

The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-100 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.

  • BoreØ63 mm
  • Stroke800 mm
  • Port sizeG3/8
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM18×1.5
  • CushionAdjustable, 29 mm
$199.10 $206.60Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every JSIJ63 stroke, adjustment, mounting and version on one page All JSIJ63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100

Its external adjuster shortens the extend stroke by up to 100 mm, giving a usable extend range of 700 to 800 mm while the retract end remains fixed. The hard-anodized aluminum extruded barrel keeps the overall body shorter and more compact than a same-bore ISO 15552 unit. Air connects via a G3/8 port.

This double-acting double-rod unit uses adjustable air cushions of 29 mm at both ends to decelerate the payload smoothly. Because this SKU lacks the -S magnet option, it cannot accept CMSE or DMSE sensors for position detection. Note that the cushion only slows the piston near the end of travel; it does not function as a load lock. To prevent drift on air loss, install an external rod lock or a pilot-operated check valve.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100 Technical Specifications

ModelAirtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100
SeriesJSI JIS-standard profile cylinder
Bore sizeØ63 mm
Stroke800 mm
Acting typeDouble acting, double rod, adjustable stroke
Port sizeG3/8
Rod threadM18×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max standard strokeUp to 1500 mm

Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N1962 N
Max (@1.0 MPa)286 kgf

JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).

Model Code: Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100

JSIJJIS-standard profile cylinder (adjustable-stroke type).
63Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125).
×800Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensors.

JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.

Where the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100 Is Used

conveyor_belt

Long-Transfer Diverter

Pushes heavy cartons across a 750 mm conveyor gap, using the 100 mm adjuster to fine-tune the contact point without moving the cylinder mounts.

warehouse

Pallet Stopper Gate

Acts as an extendable physical stop for pallets on a roller line, dialing the extend stroke down from 800 mm to 720 mm to accommodate varying pallet depths.

forklift

Vertical Lift Station

Raises a 70 kg fixture using the 0.5 MPa push force, relying on external linear guides to handle the 800 mm stroke and prevent rod deflection.

Is the Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100 the Right Cylinder?

The adjustable -100 mm window is highly useful when you want a single spare cylinder that can cover multiple stroke variants between 700 and 800 mm. You can mount it using FA, LB, TC, TCM1, or TCM2 brackets. Because the stroke is 800 mm, you must support the load with external guides to prevent rod bending and excessive side loading. Without the -S suffix, this specific model cannot support magnetic sensing.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Set cushions to minimum, then release gradually.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100 FAQ

The theoretical maximum force is 318 kgf at 1.0 MPa. The G3/8 port supplies air to the 20 mm rod.

The nominal stroke is 800 mm, which is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, yielding a usable extend range of 700 to 800 mm. The retract end position is fixed and cannot be adjusted.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC JSI Cylinders

Request a Quote for Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for JSIJ63X800-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.