
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-100S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Its external adjuster lets you shorten the extend stroke on-site by up to 100 mm, meaning the usable extension runs 700 to 800 mm while the retract end stays fixed. You can fine-tune the stopping point without swapping the whole unit. The hard-anodized aluminum extruded barrel keeps the total length shorter than an ISO 15552 cylinder of the same bore.
Because the -S suffix denotes a built-in piston magnet, this model directly accepts CMSE or DMSE reed and electronic switches in its side grooves. Pneumatic connections use a G3/8 port, and adjustable air cushions of 29 mm at each end absorb kinetic energy. Remember that the cushion only decelerates; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended load.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-100S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Tunes the 800 mm extend stop precisely to push varying box sizes onto secondary packaging lines without changing the cylinder.
Adjusts the extend end position on-site to lower assemblies onto shelves of different heights using a single shared actuator.
Dials in the exact 700 to 800 mm extension needed to halt pallets at varying conveyor widths before the wrapping station.
Choose it when a 50 mm falls short on thrust but an 80 mm is physically too large. The 100 mm adjuster window is highly useful when you need to share one spare cylinder across multiple stroke variants or dial in a precise end position on the machine. JSIJ mounting options include Basic, FA, LB, TC, TCM1, and TCM2 brackets. The integrated -S magnet supports CMSE/DMSE sensors for position feedback. Because the stroke is 800 mm, you must support the load with external guides to prevent rod bending and excessive side loading.
AirtacDistr lists every JSIJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-jsij63-adjustable-double-rod-cylinder
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa. This 63 mm bore model uses a G3/8 port and features a 20 mm piston rod with an M18x1.5 rod-end thread.
The nominal 800 mm stroke is the maximum extension. An external stop screw lets you shorten the extend stroke on-site by up to 100 mm, giving a usable extension range of 700 to 800 mm. The retract end remains fixed. This mechanism sets the end position and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.