
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-10S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The hard-anodized aluminium barrel keeps the total envelope more compact than a same-bore ISO 15552 unit. A built-in magnet (-S) allows CMSE or DMSE switches to drop directly into the side grooves for precise end-position sensing.
The external stop screw provides a 10 mm on-site adjustment window, letting you fine-tune the usable extend stroke down to 790 mm without changing the cylinder itself, while the retract end remains fixed. Air connects via a G3/8 port, and adjustable air cushions of 29 mm at each end absorb end-of-stroke impact. Note that the cushion only decelerates the piston; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need to hold a load.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-10S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tune the 10 mm extend window on-site to perfectly sync a 800 mm push stroke with moving parts on a conveyor.
Uses external guides to manage the 800 mm extension safely, with the G3/8 port delivering ample flow for rapid cycling.
The 10 mm extend adjuster is ideal for synchronizing multiple actuators on-site or creating a shared spare across stroke variants, as the nominal 800 mm remains the maximum. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. Because this is an 800 mm stroke, always support the load with an external guide to prevent rod bending and excessive side loading. The -S magnet supports reed or electronic CMSE/DMSE sensors.
AirtacDistr lists every JSIJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-jsij63-adjustable-double-rod-cylinder
Quick checklist
This 63 mm bore cylinder pushes 1559 N and pulls 1402 N at 0.5 MPa. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical max force is 318 kgf at 1.0 MPa. The air port size is G3/8.
The nominal 800 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke by up to 10 mm on-site, giving a usable range of 790-800 mm. The retract end is fixed, and the stop sets position rather than locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.