
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-20 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
Its extruded hard-anodized aluminium barrel is noticeably shorter than a same-bore ISO 15552 unit, saving machine footprint without losing thrust. The G3/8 port matches the bore size for optimal flow.
The -20 code means an external adjuster can shorten the extend stroke by up to 20 mm on site, giving a usable range of 780 to 800 mm while the retract end stays fixed. You can fine-tune the end position without physically swapping the cylinder. Note this plain SKU lacks a magnet and cannot take a CMSE or DMSE sensor.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-20 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Moves workpieces down an 800 mm conveyor section, using the 20 mm adjuster to dial in the exact push-off distance without repositioning the cylinder mount.
Squares pallets entering a wrapper by extending a full 800 mm, with the external stop screw fine-tuning the contact face to compensate for pallet width variations.
Lifts a 79 kg load through a 780 mm vertical path, relying on the adjustable stroke to set a precise upper stop while external guides handle the side loading.
Sizing this bore against its neighbours: stepping down to a 50 mm bore drops the 0.5 MPa push force to 982 N, while stepping up to an 80 mm bore raises it to 2513 N. The 63 mm bore sits comfortably in the middle for medium-duty cycles. The adjustable stroke is invaluable when you need on-site end-position tuning or want a single shared spare across slightly different stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is an 800 mm stroke, you must support the load with external guides to prevent rod bending and excessive side loading. Remember this non-magnet SKU cannot accept position sensors.
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port and a 29 mm adjustable air cushion at each end.
The external adjuster lets you shorten the extend stroke by up to 20 mm on site. The nominal 800 mm stroke is the maximum, so your usable extend range is 780 to 800 mm, while the retract end remains fixed. The stop sets the end position but does not lock the load; for load holding on air loss you need an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.