
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-20S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
The external adjuster lets you trim the forward stroke by up to 20 mm, yielding a usable 780 to 800 mm range while the retract end remains fixed. This allows fine end-position tweaking without physically swapping the cylinder.
Built as a JIS-standard profile unit, the hard-anodized aluminum barrel makes it more compact than a same-bore ISO 15552 cylinder. It carries a built-in magnet for CMSE/DMSE sensors and uses a G3/8 port. Note that the air cushion only decelerates; use an external rod lock to hold loads.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-20S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Pushes pallets across a 780 to 800 mm gap, using the 20 mm adjuster to dial in the exact contact point without moving the cylinder mounts.
Raises a 79 kg safety gate using the 63 mm bore, relying on an external check valve to hold the load since the cushion only decelerates.
Secures oversized parts at 800 mm extension, trimming the forward stroke 20 mm to compensate for varied fixture thicknesses.
The 20 mm adjuster window is ideal for sharing a spare across stroke variants or finalizing end positions on-site. JSIJ mounting options include FA, LB, TC, TCM1, and TCM2. The -S suffix means a magnet is present for CMSE/DMSE switches. Because the stroke is 800 mm, always use external guides to prevent rod bending and manage side loads.
AirtacDistr lists every JSIJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-jsij63-adjustable-double-rod-cylinder
Quick checklist
At 0.5 MPa it pushes 1559 N and pulls 1402 N. At 0.7 MPa it pushes 2182 N and pulls 1962 N. The theoretical maximum force is 318 kgf at 1.0 MPa. It uses a G3/8 port.
The nominal 800 mm stroke is the maximum. An external stop screw lets you shorten the extend stroke on-site by up to 20 mm, giving a usable 780 to 800 mm range. The retract end is fixed, and this mechanism sets end position rather than locking the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.