
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-30 is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
An external stop screw lets you shorten the extend stroke by up to 30 mm, yielding a usable range of 770-800 mm, with 800 mm as the maximum. The retract end remains fixed. This hard-anodized aluminum barrel design is more compact than a same-bore ISO 15552 unit. It uses a G3/8 port and an M18x1.5 rod thread.
Adjustable air cushions of 29 mm at each end absorb kinetic energy, but remember this mechanism only decelerates the piston; it does not hold the load on air loss. For that, you need an external rod lock or pilot-operated check valve. Note this specific SKU lacks a magnet, so it cannot accept CMSE or DMSE sensors.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-30 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tunes the 770-800 mm extend position on-site to match varying pallet widths without changing the cylinder mount.
The 30 mm adjustable window is highly useful when you need to fine-tune the extend endpoint without physically swapping the cylinder, or when keeping a shared spare across slightly different stroke variants. Mounting options include FA, LB, TC, TCM1, and TCM2. Because this is an 800 mm stroke, you must account for side-load and rod-bending risks by supporting the load with external guides to prevent premature seal wear. To add position sensing, you must select the -S magnet variant for CMSE/DMSE switches.
Quick checklist
The theoretical maximum force is 318 kgf at 1.0 MPa. This 63 mm bore unit uses a G3/8 air port, a 20 mm rod, and M18x1.5 rod threads.
The -30 indicates an external adjuster that lets you shorten the extend stroke by up to 30 mm on-site. The usable extend range is 770-800 mm, with the nominal 800 mm being the maximum. The retract end is fixed, and the stop screw sets the end position rather than acting as a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.