
The AirTAC JSIJ63~80 Adjustable Cylinder JSIJ63X800-30S is a genuine double acting, double rod, adjustable stroke JIS-standard air cylinder with a Ø63mm bore and 800mm stroke, G3/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
It is a double-acting double-rod actuator with a hard-anodized aluminium barrel, making it shorter and more compact than a same-bore ISO 15552 unit. The G3/8 port feeds a 30-800 mm/s speed range.
The -30 code means an external stop screw lets you shorten the extend stroke on-site by up to 30 mm, giving a usable range of 770-800 mm without changing the hardware. The -S suffix adds a piston magnet for CMSE/DMSE sensors in the side grooves. Note that the air cushion only decelerates; use an external rod lock for held loads.
| Model | Airtac JSIJ63~80 Adjustable Cylinder JSIJ63X800-30S |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 800 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G3/8 |
| Rod thread | M18×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
JSIJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| JSIJ | JIS-standard profile cylinder (adjustable-stroke type). |
|---|---|
| 63 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Fine-tune the 800 mm extend stop by 30 mm on-site to match varying pallet sizes without remounting the actuator.
Shortens the extend stroke to 770 mm to eject parts precisely, fitting a tighter JIS profile footprint than ISO 15552.
The -30 mm adjustable window is ideal when you need to fine-tune the extend end position on-site or want a single spare part covering 770-800 mm strokes. Mounting options include FA, LB, TC, TCM1, and TCM2. The -S magnet supports CMSE/DMSE switches. Because the stroke is 800 mm, always use external guides to prevent rod bending and side loads.
Quick checklist
The theoretical max force is 318 kgf at 1.0 MPa. It uses a G3/8 port, a 20 mm rod with an M18x1.5 thread, and 29 mm adjustable air cushions.
The nominal stroke is 800 mm, which is the maximum extend length. The external adjuster lets you shorten the extend stroke on-site by up to 30 mm, yielding a usable range of 770-800 mm. The retract end is fixed, and this stop mechanism only sets position; it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.